============> FreeIdaho <============

Door and Wall Prop

In the action-shooting sports, sometimes props can add a lot of challenge and aesthetics to a course of fire.  This wall has a door in the center.  The prop can be set within a stage so that the door can open in our out, with the door knob on the left or right.  The door is lightweight, strong, and easy to construct.

This door also has a target activation mechanism too.  When the door opens, the weighted red gas can falls and activates targets down range.

These plans are free for non-commercial use and are offered with no warranty or other claims expressed or implied.  Ken Reed, 09/07/2005.

Stage 9 of the 2005 Idaho State IDPA Match.  Falling gas can actuates target.

Beginning of 2"x4" framing.

All framing construction is with Gorilla glue and deck screws.

Construction ongoing.

Saloon door hinge with plywood door adapter.

Door can open in or out using Saloon door hinge.

Attachment to framing.

Ensuring a straight cut.

Screwing 1/4" plywood wall onto 2"x2" nailer in framing, no glue so they are replaceable.

Finished carpentry.

Plywood door mounted.

Opening the door, pulls on the release rope.

Weight is released when the door opens, which activates targets.

A pulley changes the falling weight into a pulling motion.

Gate latch used to lock the door into the closed position. Note home made striker plate.

Professional painting by Bruce, getting ready for the State match.

Copyright © 2005 - 2006, Ken Reed